FL100
CNMI
Availability: | |
---|---|
Quantity: | |
Decorative colored flakes (sometimes also known as chips or flecks) add color, texture, and visual appeal to your floor coating. If you have never worked with epoxies and colored flakes before we suggest you give this articlebelow a read to ensure you know how to properly apply colored flakes on your epoxy floor coating.
Flakes come in all different shapes and sizes. See our article about the different types of colored flakes and sizes. Every epoxy application will differ slightly in install schedule but it’s important to note that when applying epoxy flakes they will always be applied to either a primer/base coat and then coated over with a clear topcoat. The flakes need to adhere to the wet epoxy underneath and then are sealed in with the clear topcoat creating a seamless, decorative finish.
You want to start the application of broadcasting flakes within a couple of minutes of laying down the colored coating layer that the flakes will be adhering to. Ensure that you have your colored flakes prepared for application prior to rolling on the colored epoxy coat so you are ready for application when done rolling.
There are a couple of methods to applying colored flakes to a floor coating. The first is the most standard method and that is by throwing the epoxy flakes onto the floor and letting them naturally fall on the wet epoxy. Most colored flake combinations come pre-mixed but if they are not then you can mix them yourself by pouring all the flakes into a bucket and mixing/tossing them around with your hand to get an even mixture.
Payment and Shipping
Contact us
Decorative colored flakes (sometimes also known as chips or flecks) add color, texture, and visual appeal to your floor coating. If you have never worked with epoxies and colored flakes before we suggest you give this articlebelow a read to ensure you know how to properly apply colored flakes on your epoxy floor coating.
Flakes come in all different shapes and sizes. See our article about the different types of colored flakes and sizes. Every epoxy application will differ slightly in install schedule but it’s important to note that when applying epoxy flakes they will always be applied to either a primer/base coat and then coated over with a clear topcoat. The flakes need to adhere to the wet epoxy underneath and then are sealed in with the clear topcoat creating a seamless, decorative finish.
You want to start the application of broadcasting flakes within a couple of minutes of laying down the colored coating layer that the flakes will be adhering to. Ensure that you have your colored flakes prepared for application prior to rolling on the colored epoxy coat so you are ready for application when done rolling.
There are a couple of methods to applying colored flakes to a floor coating. The first is the most standard method and that is by throwing the epoxy flakes onto the floor and letting them naturally fall on the wet epoxy. Most colored flake combinations come pre-mixed but if they are not then you can mix them yourself by pouring all the flakes into a bucket and mixing/tossing them around with your hand to get an even mixture.
Payment and Shipping
Contact us