English
 |
EPOXY PUTTY
CNMI
| Quantity: | |
|---|---|
USING METHOD
<1> Clean and dry the surface after getting rid of the oil,dirty, rust. lf the surface is smooth, it is required to make
the surface to be rough firstly, then clean and dry.
<2> For usage of glue cement, adjust the glue A and B according to the component rate as1:1. Then, mix them to
be single color by agitating evenly. For usage of glue sticks,please cut a proper quantity, temper it to be even and single color. The operation should be completed within 3-5 minutes after mixing evenly. During the operation, please press the glue hardly and strictly on the adhesive surface. The glue would stiffen as hard as steel after one hour. Then, go on polishing, planning, drilling, painting or machining. 24 hours later, the glue would achieve the max intensity.
About this product:
CNMI EPOXY PUTTY: A Hand Mixable Two Part Epoxy Putty Stick That Is Steel Reinforced & Non-Rusting To Quickly Repair Or Rebuild Anything Made Of Metal! Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Steel stik Takes 5 Minutes To Set And Cures In 1 Hour. Epoxy putty Set And Cure Color Is Dark GreyProduct Features And Strength: CNMI epoxy resin has Lap Shear Strength Of 900 Psi, Can Withstand Continuous Temperatures Up To 350F (176C ) And Intermittent Temperatures Of 450F (232C), And Is Chemical Resistant Against Petroleum, Hydraulic Fluids And Other Chemicals When Fully Cured. Surface Applications: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass And Plastic & Pvc
USING METHOD
<1> Clean and dry the surface after getting rid of the oil,dirty, rust. lf the surface is smooth, it is required to make
the surface to be rough firstly, then clean and dry.
<2> For usage of glue cement, adjust the glue A and B according to the component rate as1:1. Then, mix them to
be single color by agitating evenly. For usage of glue sticks,please cut a proper quantity, temper it to be even and single color. The operation should be completed within 3-5 minutes after mixing evenly. During the operation, please press the glue hardly and strictly on the adhesive surface. The glue would stiffen as hard as steel after one hour. Then, go on polishing, planning, drilling, painting or machining. 24 hours later, the glue would achieve the max intensity.
About this product:
CNMI EPOXY PUTTY: A Hand Mixable Two Part Epoxy Putty Stick That Is Steel Reinforced & Non-Rusting To Quickly Repair Or Rebuild Anything Made Of Metal! Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Steel stik Takes 5 Minutes To Set And Cures In 1 Hour. Epoxy putty Set And Cure Color Is Dark GreyProduct Features And Strength: CNMI epoxy resin has Lap Shear Strength Of 900 Psi, Can Withstand Continuous Temperatures Up To 350F (176C ) And Intermittent Temperatures Of 450F (232C), And Is Chemical Resistant Against Petroleum, Hydraulic Fluids And Other Chemicals When Fully Cured. Surface Applications: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass And Plastic & Pvc
